Connecting a new Spirostik Blue device

1. Open Bluecherry and go into the bluetooth devices screen 

1.  SETUP > 
2. Advanced (Bottom left)> 
3. Devices > 
4. Bluetooth Devices, then SpiroBlue -

2. Enter batteries into the device so that the light on the spirometer is a flashing blue light, which shows that the device is searching for a connection.

3. Click the grey scan button on the device section of this page to search for the device. 

4. Click the device that appears once the scan search is underway. Serial number of the spirometer should appear in the box. (Please see image below for reference). 

5. Check Enabled tick box

6. ensure the Blueflow Mouthpiece with BV Filter is selected

7. Click accept in the bottom right and if a pop up window comes up to allow bluetooth connection in the windows setting of your laptop or tablet, click on the pop up window and click allow.

8. Once you click allow, the Spirostik should be connected and the light on the spirometer should turn to a solid green light to indicate that the device has been connected and is ready to use.